配置静态MAC 示例

胡振宇

在Switch上创建VLAN 2，并把接口GE1/0/1和GE1/0/2加入VLAN 2
<HUAWEI> system-view
[HUAWEI] sysname Switch
[Switch] vlan batch 2 //创建VLAN 2
[Switch] interface gigabitethernet 1/0/1
[Switch-GigabitEthernet1/0/1] port link-type access //和接入设备PC相连的接口类型必须是access，
接口默认类型不是access，需要手动配置为access
[Switch-GigabitEthernet1/0/1] port default vlan 2 //接口GE1/0/1加入VLAN 2
[Switch-GigabitEthernet1/0/1] quit
[Switch] interface gigabitethernet 1/0/2 //接口GE1/0/2的配置方法和接口GE1/0/1相同
[Switch-GigabitEthernet1/0/2] port link-type access
[Switch-GigabitEthernet1/0/2] port default vlan 2
[Switch-GigabitEthernet1/0/2] quit
步骤2 在Switch上添加服务器对应的静态MAC地址表项
[Switch] mac-address static 4-4-4 gigabitethernet 1/0/2 vlan 2
步骤3 在Switch上添加PC对应的静态MAC地址表项
[Switch] mac-address static 2-2-2 gigabitethernet 1/0/1 vlan 2
步骤4 检查配置结果
# 在任意视图下执行display mac-address static vlan 2命令，查看静态MAC表是否添加
成功。
[Switch] display mac-address static vlan 2
-------------------------------------------------------------------------------
MAC Address VLAN/VSI Learned-From Type
-------------------------------------------------------------------------------
0002-0002-0002 2/- GE1/0/1 static
0004-0004-0004 2/- GE1/0/2 static
-------------------------------------------------------------------------------
Total items displayed = 2