配置VLAN 间通过VLANIF 接口互通示例

胡振宇

<HUAWEI> system-view
[HUAWEI] sysname Switch
[Switch] vlan batch 10 20
[Switch] interface gigabitethernet 1/0/1
[Switch-GigabitEthernet1/0/1] port link-type access //和接入设备相连的接口类型设置为access
[Switch-GigabitEthernet1/0/1] port default vlan 10 //接口加入VLAN10
[Switch-GigabitEthernet1/0/1] quit
[Switch] interface gigabitethernet 1/0/2
[Switch-GigabitEthernet1/0/2] port link-type access
[Switch-GigabitEthernet1/0/2] port default vlan 20
[Switch-GigabitEthernet1/0/2] quit
# 配置VLANIF接口的IP地址。
[Switch] interface vlanif 10
[Switch-Vlanif10] ip address 10.10.10.2 24 //将VLANIF10的IP地址配置为10.10.10.2/24
[Switch-Vlanif10] quit
[Switch] interface vlanif 20
[Switch-Vlanif20] ip address 10.10.20.2 24 //将VLANIF20的IP地址配置为10.10.20.2/24
[Switch-Vlanif20] quit