|

适用标准Applicable standards
GB/T 17626.5,IEC/EN 61000-4-5
(1)行业对象Industry objects
电源行业,防雷元件厂家
Power industry, manufacturers of lightning protection components
(2)产品特点Product Features
电脑+PLC控制,软件操作自动控制完成测试
Compute+ Plc Control, Complete the test automation software operation
电脑软件读取示波器波形,并计算出波形参数
Computer software reads the oscilloscope waveform and waveform parameters calculated
软件保存测试产品的波形参数,直接输出打印报表
Waveform parameters of the software to save the test product, direct output printing a report
程控高压电源,电压稳定精度准备,击穿电流电压示波器及软件
Programmable high voltage power supply, voltage stability and accuracy preparation, breakdown voltage current software oscilloscope and simultaneously display
同时显示Displayed simultaneously
采用进口无感大功率电阻,确保浪涌波形一致性
Imported without a sense of power resistors to ensure consistency of the surge waveform
电压极性自动切换正、负极性自动切换
Automatic switching voltage polarity positive, negative automatic switching
浪涌注入相位角度0-360°自由设定(30°步进)
synchronous in a range between 0-360 versus the AC line phase angle(30 stepper)
内置电,流/电压探头, 示波器及软件可同时观测波形
Built-in current/voltage probes, Oscilloscopes and waveform software can be observed simultaneously
RJ45网络接口,RS-232通信选配串口, 实现远程控制
RJ45 Network Interface,RS-232 communication interface, can be implemented remote control
(3)性能参数Performance Parameters
开路电压波形:1.2/50μS(1.2μS±30%、50μS±20%)
open circuit voltage waveform: 1.2/50μS(1.2μS±30%、50μS±20%)
短路电流波形:8/20μS (8μS±20%、20μS±20% )
short circuit voltage waveform: 8/20μS (8μS±20%、20μS±20% )
设备充电电压调节采用无级调压模式,该设备的充电电压为500V-20KV持续可调短路电流波形
The equipment adopts stepless voltage charging voltage regulation mode, the charge voltage of the device is 500V-20KV adjustable short-circuit current waveform duration
输出开路电压:500V -20KV(±10%) output voltage:500-20kv(±10%)
输出短路电流:250A-10KA output short circuit current t: 250A-10KA
电压极性:正/负 Voltage polarity: positive/ negative
输出阻抗: 2Ω(±0.2Ω) Output impedance: 2Ω(±0.2Ω)
间隔时间:10-999S Interval time:10-999S
触发方式: 相位角0°~360° Trigger-mode: Phase angle0°~360°
|
|