系统集成论坛
标题: 基于TIDA-01003的采用 YUV422、FPD-Link III 和 4-36V 同轴电缆供电技术的汽车 1MP... [打印本页]
作者: iczoom188 时间: 2018-12-6 17:40
标题: 基于TIDA-01003的采用 YUV422、FPD-Link III 和 4-36V 同轴电缆供电技术的汽车 1MP...
基于TIDA-01003的采用 YUV422、FPD-Link III 和 4-36V 同轴电缆供电技术的汽车 1MP 摄像头模块参考设计
描述
The automotive 1MP camera module reference design uses a CMOS imager to provide multiple uncompressed video formats over FPD-Link III. Supported video formats are 8- and 10-bit YUV422. TIs FPD-Link III SerDes technology enables the transmission of video data, bidirectional control signals and power all over a single coax cable. With an input voltage range of 4-36V, this design is "short to battery" protected and can be used for advanced driver assist and infotainment systems such as surround view systems, rear view cameras, driver monitoring, smart mirror and as a replacement for analog or Ethernet cameras.
特性
Module outputs YUV422 720p up to 30fps
Power supply using wide input voltage switching converter to withstand short to battery condition
Single Rosenberger Fakra coax connector for digital video, power, control and diagnostics
Space optimized design fits on a single PCB 20 x 20mm
TI产品现货库存在线购买:https://www.iczoom.com/brand/509-c-1-20.html
TI 器件 (4)
| | |
| 25-100MHz 10/12 位 FPD-Link III 串行器 | |
| LM5360x-Q1 面向 1000mA 空间受限类应用的同步降压稳压器 | |
| | |
| 采用 2x2mm SON/TSOT23 封装的汽车类 2.25MHz 600mA 降压转换器 | |
应用
前置传感器融合
后置摄像头
欢迎光临 系统集成论坛 (http://bbs.xtjc.com/) |
Powered by Discuz! X3.1 |