引脚符号 | 引脚类型 | 定义 |
ANT1 | Null | External antenna |
GND | Ground | The ground pin should be connected to the cathode of power supply |
VCC | Power | The 3.3V pin should be connected to the positive of power supply |
P0.00-P0.04 | Digital/Analog | General purpose I/O or Analog input |
P0.08-P0.24 | Digital I/O | General purpose I/O |
SWCLK | Digital I/O | System reset, HW debug and flash Programming I/O |
SWDIO | Digital I/O | HW debug and flash Programming I/O |
参数 | 数值 | 备注 |
工作电压 | 1.8-3.6V | DC |
工作频率 | 2400-2483MHz | Programmable |
频率误差 | +/- 20KHz | Null |
发射功率 | -30~+4dBm | Programmable |
接收灵敏度 | -93dBm | High gain mode |
接收电流 | 13mA | Standard mode |
发射电流 | 10.5mA | Transmission power 0dBm |
睡眠功耗 | 1 uA以下 | Power mode 3, connection-less state |
遥控距离 | 10-60米 | BER<0.1%, Open space |
天线 | 50ohm | Null |
模块尺寸 | 15.8*12*2mm | Null |
传输距离 | 10-60米(空旷) | 半径距离 |
支持设备系统 | 支持设备型号 |
iOS 7.0及以上 | iPhone 4S,iPhone 5, iPhone 5S,iphone 6, iPhone 6p,iPad 3, iPad mini, iPad air等 |
Android 4.3及以上 | 华为,小米,OPPO,魅族,VIVO,Samsung Galaxy S III, HTC One 等 |
欢迎光临 系统集成论坛 (http://bbs.xtjc.com/) | Powered by Discuz! X3.1 |