系统集成论坛

标题: 配置OSPF区域路由聚合功能示例 [打印本页]

作者: 胡振宇 时间: 2015-11-27 17:49
标题: 配置OSPF区域路由聚合功能示例
RouterA的配置

#
sysname RouterA
#
router id 1.1.1.1  //Router ID，建议配置为LoopBack0的IP地址
#
interface GigabitEthernet1/0/0
ip address 192.168.2.1 255.255.255.0
#
interface GigabitEthernet2/0/0
ip address 192.168.3.1 255.255.255.0
#
interface GigabitEthernet3/0/0
ip address 192.168.0.1 255.255.255.0
#
interface LoopBack0
ip address 1.1.1.1 255.255.255.255
#
ospf 2
area 0.0.0.0
  network 192.168.0.0 0.0.0.255  //指定运行OSPF 2协议的接口的IP地址位于192.168.0.0/24网段，接口所属的区域为area 0
  network 192.168.2.0 0.0.0.255
  network 192.168.3.0 0.0.0.255
#
RouterB的配置

#
sysname RouterB
#
router id 2.2.2.2
#
interface GigabitEthernet1/0/0
ip address 192.168.1.2 255.255.255.0
#
interface GigabitEthernet2/0/0
ip address 192.168.0.2 255.255.255.0
#
interface LoopBack0
ip address 2.2.2.2 255.255.255.255
#
ospf 2
area 0.0.0.0
  abr-summary 192.168.2.0 255.255.254.0  //在区域边界路由器（ABR）上配置路由聚合
  network 192.168.0.0 0.0.0.255
area 0.0.0.1
  network 192.168.1.0 0.0.0.255
#
RouterC的配置

#
sysname RouterC
#
router id 3.3.3.3
#
interface GigabitEthernet1/0/0
ip address 192.168.1.1 255.255.255.0
#
interface LoopBack0
ip address 3.3.3.3 255.255.255.255
#
ospf 2
area 0.0.0.1
  network 192.168.1.0 0.0.0.255
#

欢迎光临系统集成论坛 (http://bbs.xtjc.com/)