系统集成论坛

标题: 配置路由式Proxy ARP 示例 [打印本页]

作者: 胡振宇 时间: 2015-11-23 14:53
标题: 配置路由式Proxy ARP 示例
<HUAWEI> system-view
[HUAWEI] sysname Switch_1
[Switch_1] vlan batch 10
[Switch_1] interface gigabitethernet 1/0/1
[Switch_1-GigabitEthernet1/0/1] port link-type access
S7700&S9700 系列交换机
典型配置举例3 基础特性典型配置
文档版本 04 (2015-10-23) 华为专有和保密信息
版权所有 © 华为技术有限公司
320
[Switch_1-GigabitEthernet1/0/1] port default vlan 10
[Switch_1-GigabitEthernet1/0/1] quit
[Switch_1] interface vlanif 10
[Switch_1-Vlanif10] ip address 172.16.1.1 24
# 配置Switch_2。
<HUAWEI> system-view
[HUAWEI] sysname Switch_2
[Switch_2] vlan batch 20
[Switch_2] interface gigabitethernet 1/0/1
[Switch_2-GigabitEthernet1/0/1] port link-type access
[Switch_2-GigabitEthernet1/0/1] port default vlan 20
[Switch_2-GigabitEthernet1/0/1] quit
[Switch_2] interface vlanif 20
[Switch_2-Vlanif20] ip address 172.16.2.1 24
步骤2 配置路由式Proxy ARP
# 配置Switch_1。
[Switch_1-Vlanif10] arp-proxy enable //配置路由式Proxy ARP
[Switch_1-Vlanif10] quit
# 配置Switch_2。
[Switch_2-Vlanif20] arp-proxy enable //配置路由式Proxy ARP
[Switch_2-Vlanif20] quit

欢迎光临系统集成论坛 (http://bbs.xtjc.com/)