系统集成论坛

标题: 配置E-Trunk 接入VPLS 示例 [打印本页]

作者: 胡振宇 时间: 2015-11-23 13:39
标题: 配置E-Trunk 接入VPLS 示例
<HUAWEI> system-view
[HUAWEI] sysname PE1
[PE1] vlan batch 100
[PE1] interface gigabitethernet 1/0/3
[PE1-GigabitEthernet1/0/3] port link-type trunk
[PE1-GigabitEthernet1/0/3] port trunk allow-pass vlan 100
[PE1-GigabitEthernet1/0/3] quit
[PE1] interface vlanif 100
[PE1-Vlanif100] ip address 10.1.1.1 24
[PE1-Vlanif100] quit
S7700&S9700 系列交换机
典型配置举例3 基础特性典型配置
文档版本 04 (2015-10-23) 华为专有和保密信息
版权所有 © 华为技术有限公司
167
[PE1] interface loopback 1
[PE1-LoopBack1] ip address 1.1.1.9 32
[PE1-LoopBack1] quit
[PE1] ospf 1
[PE1-ospf-1] area 0
[PE1-ospf-1-area-0.0.0.0] network 1.1.1.9 0.0.0.0
[PE1-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[PE1-ospf-1-area-0.0.0.0] quit
[PE1-ospf-1] quit
# 配置汇聚交换机PE2。
<HUAWEI> system-view
[HUAWEI] sysname PE2
[PE2] vlan batch 200
[PE2] interface gigabitethernet 1/0/3
[PE2-GigabitEthernet1/0/3] port link-type trunk
[PE2-GigabitEthernet1/0/3] port trunk allow-pass vlan 200
[PE2-GigabitEthernet1/0/3] quit
[PE2] interface vlanif 200
[PE2-Vlanif200] ip address 10.1.2.1 24
[PE2-Vlanif200] quit
[PE2] interface loopback 1
[PE2-LoopBack1] ip address 2.2.2.9 32
[PE2-LoopBack1] quit
[PE2] ospf 1
[PE2-ospf-1] area 0
[PE2-ospf-1-area-0.0.0.0] network 2.2.2.9 0.0.0.0
[PE2-ospf-1-area-0.0.0.0] network 10.1.2.0 0.0.0.255
[PE2-ospf-1-area-0.0.0.0] quit
[PE2-ospf-1] quit
# 配置汇聚交换机PE3。
<HUAWEI> system-view
[HUAWEI] sysname PE3
[PE3] vlan batch 100 200
[PE3] interface gigabitethernet 1/0/1
[PE3-GigabitEthernet1/0/1] port link-type trunk
[PE3-GigabitEthernet1/0/1] port trunk allow-pass vlan 100
[PE3-GigabitEthernet1/0/1] quit
[PE3] interface gigabitethernet 1/0/2
[PE3-GigabitEthernet1/0/2] port link-type trunk
[PE3-GigabitEthernet1/0/2] port trunk allow-pass vlan 200
[PE3-GigabitEthernet1/0/2] quit
[PE3] interface vlanif 100
[PE3-Vlanif100] ip address 10.1.1.2 24
[PE3-Vlanif100] quit
[PE3] interface vlanif 200
[PE3-Vlanif200] ip address 10.1.2.2 24
[PE3-Vlanif200] quit
[PE3] interface loopback 1
[PE3-LoopBack1] ip address 3.3.3.9 32
[PE3-LoopBack1] quit
[PE3] ospf 1
[PE3-ospf-1] area 0
[PE3-ospf-1-area-0.0.0.0] network 3.3.3.9 0.0.0.0
[PE3-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[PE3-ospf-1-area-0.0.0.0] network 10.1.2.0 0.0.0.255
[PE3-ospf-1-area-0.0.0.0] quit
[PE3-ospf-1] quit

欢迎光临系统集成论坛 (http://bbs.xtjc.com/)