#tar xzvf pptpd-1.2.3.tar.gz
# ./configure
# make; make install
相关的配置文件：
/etc/pptpd.conf
# pptpd的基本配置文件
/etc/ppp/options.pptpd
# VPN拨号选项
/etc/ppp/chap-secrets
# 用户名和密码信息
/etc/modules.conf
# 模块加载信息
（2.4的Kernel请修改/etc/modules.conf）
vi /etc/pptpd.confppp /usr/local/sbin/pppd
#指定pppd的路径
option /etc/ppp/options.pptpd
# 指定option 文件位置
localip 192.168.1.3
#同服务器的LAN地址
remoteip 192.168.1.230-239
#分配給客户端的ip
本例范围从192.168.1.230到192.168.1.239。您也可以单独指定某个地址或者多段地址，用逗号隔开，如在192.168.1.230-239,192.168.1.254
vi /etc/ppp/options.pptpd
name *
lock
mtu 1450
mru 1450
proxyarp
auth
ipcp-accept-local
ipcp-accept-remote
lcp-echo-failure 3
lcp-echo-interval 5
deflate 0
# Handshake Auth Method
- 加密协议类型
chap
mschap-v2
# Data Encryption Methods
mppe required,stateless
其它详细说明请参见 man pppd
或者 man pptpd
vi /etc/ppp/chap-secrets
#client server Password IP Address
test * 12345 *
因为密码是明文显示的，最好能修改文件权限，使root作为owner和chmod 700
vi /etc/modules.conf
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-18 ppp_mppe_mppc
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
重新启动
# reboot
在我这里 alias ppp-compress-18 ppp_mppe_mppc 好像没用，只好手动加载：
# modprobe ppp_mppe_mppc
确认内核支持
strings `which pppd`|grep -i mppe|wc --lines
30
###大于等于30就行#####
[strings `which pppd`|grep -i mppc|wc --lines
7
#### 不为 0 #####
dmesg | grep MPPE
MPPE/MPPC encryption/compression module registered
启动pptpd
# /usr/local/sbin/pptpd
Mar 17 23:07:32 localhost pptpd[4471]:
MGR: Manager process started
Mar 17 23:07:32 localhost pptpd[4471]:
MGR: Maximum of 10 connections available
设置客户端连接，“安全”里面选择自定义，如图所示，这里取决于你在option.pptpd里面的设置：
Mar 17 23:09:59 localhost pptpd[4473]:
CTRL: Client 192.168.1.136
control connection started
Mar 17 23:09:59 localhost pptpd[4473]:
CTRL: Starting call
(launching pppd, opening GRE)
Mar 17 23:09:59 localhost pppd[4474]:
pppd 2.4.3 started by root, uid 0
Mar 17 23:09:59 localhost pppd[4474]:
Using interface ppp0
Mar 17 23:09:59 localhost pppd[4474]:
Connect: ppp0 /dev/pts/1
Mar 17 23:10:02 localhost pptpd[4473]:
CTRL: Ignored a SET LINK INFO
packet with real ACCMs!
Mar 17 23:10:02 localhost pppd[4474]:
MPPC/MPPE 128-bit stateless compression enabled
Mar 17 23:10:04 localhost pppd[4474]:
found interface eth0 for proxy arp
Mar 17 23:10:04 localhost pppd[4474]:
local IP address 192.168.1.3
Mar 17 23:10:04 localhost pppd[4474]:
remote IP address 192.168.1.230
成功！作者: 蒋食尹519 时间: 2010-9-12 11:03
楼主说的挺好的，支持你哦~~！！作者: 小菜苗苗 时间: 2010-9-18 16:31
^_^，我不说话，嘿嘿！！找个板凳坐到 围观 ^_^！！！！！！！